- Radio Controlled vehicles
- New Products & Special Offers
- Electric Helicopters and spares
- Electric Planes & Spares
- Mini & Micro Radio controlled vehicles
- Rock Crawlers
- Tamiya Plastic Contruction kits
- Electric Stuff
- Fuel power stuff
- HPI Spares
- Traxxas Spares
- General Parts
- Nitro Fuel
- Grease, Oils, cleaner, glues, threadlock etc...
- Tools
- Radio Gear
- Edit Rc Products
- Bodies, Paint, Wings etc...
- Ansmann Racing Products
- FlyCamOne Products
- Tekno Rc Traxxas Upgrades
- Wheels & Tyres
- Castle Creations Special offers
- Leatherman multi-tools & Outdoor Accessories
- Losi Spares
- Radio Controlled boats
- Servo Department
Description
PNP Version PKZ5075i
For even more convenience and economy ParkZone have a Plug and Play (PNP) version of the T-28D Trojan that will appeal to modelers that may have a spare bit of radio kit, batteries etc in the workshop.
Featuring the same specification this version comes as a complete airframe with servos, motor and speed controller pre-installed and all you have to add is your transmitter, receiver Li-Po battery and suitable charger and you can be airborne in no time at all.
PNP T-28 Trojan features
- Ready to fly straight from the box just add
your own transmitter, receiver and battery - Industry standard 3 wire servos (pre-
installed) - Tricycle landing gear with steerable nose leg
- 480-960Kvolt brushless outrunner power
system (pre-installed) - E-flite 30Amp brushless speed controller
(included) - Durable Z-foam construction, rugged and
easily repairable - Semi-scale US Air Force colour scheme
- Pre-applied decals and painted pilot figure

| PNP T-28 Trojan Spec. | |
| Wingspan: | 1118mm(44inch) |
| Length: | 914mm (36 inches) |
| Weight: | 875gm (30 ounces) |
| Speed control: | E-flite 30Amp (switch mode BEC) brushless (pre- installed) |
| Motor: | 480 960Kv outrunner brushless motor |
| Servos: | Four 3-wire servos (pre-installed) |
| Prop Size: | 9.5 x 7.5 |
| Wingspan: | 1118mm(44inch) |
| Length: | 914mm (36 inches) |
| Weight: | 875gm (30 ounces) |
| Speed control: | E-flite® 25A brushless (EFLA1025) |
| Motor: | PKZ 480 960Kv outrunner brushless motor |
| Radio: | No Transmitter or receiver included |
| Servos: | Four 3-wire servos |
| Prop Size: | 9.5 x 7.5 |
| Recommended Battery: | 3-cell 1800mAh Li-Po battery (PKZ1031) NOT INCLUDED |
| Aileron: | Proportional |
| Elevator: | Proportional Rudder |
| Throttle: | Proportional |
| Approx. Flying Duration: | 12-15 minutes on 1800mAh Li-Po |
| Approx. Assembly Time: | 20 minutes |
| Charger: | NOT INCLUDED |
| Landing Gear: | Tricycle with steerable nose wheel |




