- Radio Controlled vehicles
- New Products & Special Offers
- Electric Helicopters and spares
- Electric Planes & Spares
- Mini & Micro Radio controlled vehicles
- Rock Crawlers
- Tamiya Plastic Contruction kits
- Electric Stuff
- Fuel power stuff
- HPI Spares
- Traxxas Spares
- General Parts
- Nitro Fuel
- Grease, Oils, cleaner, glues, threadlock etc...
- Tools
- Radio Gear
- Edit Rc Products
- Bodies, Paint, Wings etc...
- Ansmann Racing Products
- FlyCamOne Products
- Tekno Rc Traxxas Upgrades
- Wheels & Tyres
- Castle Creations Special offers
- Leatherman multi-tools
- Losi Spares
- Radio Controlled boats
PARKZONE F4F Wildcat Electric Plane PNP PKZ1975
Description
IN STOCK
Key Features
- Ready to fly in minutes with full 4-channel control – throttle, aileron, elevator and rudder
- Requires a 4-channel full range or park flyer transmitter, receiver, battery and charger (sold separately)
- Powerful 480-size 960Kv brushless outrunner motor installed
- Dual aileron servos for precise control
- Durable and lightweight Z-Foam™ construction
- Two-piece plug-in wing
- Scale details include realistic paint scheme, molded panel lines, simulated retractable landing gear and hand-painted pilot figure
- Battery compartment accommodates most 1800mAh to 2100mAh Li-Po packs (sold separately)
Overview
From Pearl Harbor through 1942 the F4F Wildcat was the only U.S. fighter in the Pacific theater capable of thwarting the advances of Japan’s naval air forces. And though it was slower and less maneuverable than the vaunted Zero, its heavier armor, self-sealing fuel tanks and rugged airframe could often help a skilled pilot overcome this performance gap and live to fight another day.
ParkZone brings the legendary Wildcat to life with this great flying Plug-N-Play park flyer modeled after a plane flown by Lieutenant Commander Edward “Butch” O’Hare – the U.S. Navy’s first flying ace. Scale touches include a realistic paint scheme, simulated engine cylinders and cowl flaps, molded wheels tucked into the fuselage and more. Its flight performance is equally impressive thanks to the full 4-channel control and ample power provided by its 480 brushless motor.
Best of all, you can have this Plug-N-Play® version ready to fly in minutes. All you need is a 4-channel full range or park flyer transmitter and receiver, a 3S 11.1V 1300mAh to 2200mAh Li-Po battery, and a 3S Li-Po charger.
Specs
| Wingspan: | 38.4 in (975mm) |
| Overall Length: | 28.7 in (730mm) |
| Flying Weight: | 25.4 oz (720 g) |
| Motor Size: | 480-sized 960Kv brushless outrunner (installed) |
| Radio: | 4+ Channel Full Range receiver (not included) |
| Servos: | PKZ SV 80 sport servos (4 installed) |
| Trim Scheme Colors: | Light gray, navy blue, white and red |
| CG (center of gravity): | 1-7/8 in (47mm) back from LE of wing at root, +/- 1/8 in (3mm) |
| Prop Size: | 9 x 6 inches |
| Speed Control : | PKZ 18A BL ESC (installed) |
| Recommended Battery: | 3S 11.1V 1300-2200mAh LiPo, 15C minimum (not included) |
| Aileron: | Proportional |
| Elevator: | Proportional |
| Rudder: | Proportional |
| Throttle: | Proportional |
| Control Throw (Ailerons): | 8mm (low rate), 11mm (high rate) |
| Control Throw (Elevator): | 9mm (low rate), 13mm (high rate) |
| Control Throw (Rudder): | 11mm (low rate), 14mm (high rate) |
| Approx. Flying Duration: | 7-10 minutes |
| Landing Gear: | No |
| Experience Level: | Intermediate |
| Recommended Environment: | Outdoor |
| Assembly Time: | Less than 1 Hour |
| Is Assembly Required: | Yes |
Needed to Complete
• 4+ Channel Full Range Transmitter and Receiver System
• 3S 11.1V 1300-2200mAh Li-Po Battery Pack, 15C Rating minimum
• Variable rate 3-cell Li-Po balancing charger