Overview
Designed by Mike McConville, the ParkZone® Extra 300 PNP comes out of the box equipped with a powerful brushless motor that provides more than enough power for precision aerobatics. Positive and negative G maneuvers, snap rolls and more are all within the Extra's capabilities. And it lets you do it all with virtually no roll or pitch coupling. Best of all, you can have this Plug-N-Play® version airborne in just a few minutes. All you need is a 4-channel full range or parkflyer transmitter and receiver, a 3S 11.1V 2200mAh Li-Po battery, and a 3S Li-Po charger.
Key Features
- Ready to fly in minutes - All you need is a 4-channel full range or parkflyer transmitter, receiver, battery and charger (sold separately)
- Powerful 15-size brushless outrunner motor installed
- E-flite® Pro 30A Switch-Mode BEC ESC installed
- Full 4-channel control – throttle, aileron, elevator and rudder
- Dual aileron servos for precise control
- Steerable tail wheel installed
- Durable and lightweight Z-Foam™ construction
- Two-piece plug-in wing
Specs
| Wingspan: |
40.6 in (1030mm) |
| Overall Length: |
36.8 in (935mm) |
| Flying Weight: |
34.5 oz (980 g) |
| Motor Size: |
15-size 950Kv brushless outrunner |
| Servos: |
4 installed |
| Trim Scheme Colors: |
White with orange and purple |
| CG (center of gravity): |
Approximately 3 in (76mm) from leading edge of wing at wing root |
| Prop Size: |
10.5 x 9 |
| Speed Control : |
30A Pro SB Brushless ESC |
| Recommended Battery: |
11.1V 2200mAh 25C (recommended) |
| Landing Gear: |
Fixed main with steerable tail wheel |
Charge-and-Fly™ convenience, outstanding flight performance and beautiful scale detail—with the ParkZone Extra 300 PNP, you get it all.
Needed to Complete
Transmitter
Receiver
Battery
Charger
Also available in Bind n Fly version (Includes battery & charger)
