Losi 1/10 22 2WD Race Buggy Kit TLR0022

NOW IN STOCK

The Team Losi Racing 1/10-scale 22 2WD Electric Race Buggy Kit is an entirely new racing platform. Without a doubt, it will reignite 1/10-scale electric racing throughout the world. The TLR 22s innovative design takes full advantage of envelope-pushing Li-Po and brushless power. It is the only platform of its kind to offer all the hardware needed in a single kit to build a rear- or mid-motor configured chassis. The 22 is about to change all the rules.

Key Features

• Front or rear motor configuration option in a single kit - an industry first
• A precision machined, 7075 -T6 2.5mm aluminum chassis for outstanding durability
• Large 12mm big bore shocks to smooth the ride and tame jumps
• All metric hardware
• Innovative steering rack design
• Verticle mount ball studs
• Bolt on camber blocks
• Adjustable front kick, caster and spindle carrier position
• Includes two (2) sets of off-road racing wheels
• All metric hardware

Chassis Call-Out

1. Mid- and Rear-Motor Option
2. 2.5mm Hard-Anodized Aluminum Chassis
3. Adjustable Caster via the Spindle (0, 3, 5, 10°)
4. 12mm Big Bore Aluminum Shock with Bladder Compensator
5. Adjustable Front Kick via Shims
6. All-Metric Hardware
7. Adjustable Spindle Carrier (Inline or Trailing)
   *Inline Optional
8. Gull Wing Suspension Arm Design (Front and Rear)
9. Wide Range or Rear Toe Adjustability
10. Optimized Motor Placement for Balance
11. Simple Repair Bolt-On Camber Blocks
12. Innovative Steering Rack Design
13. 3.5mm Heavy-Duty Turnbuckles
14. Long-Life Titanium Nitride Hinge Pins
15. Vertical Mounted Ball Studs
16. Optimized Battery Tray to Use Future Battery Technology
17. Dual Disk Slipper Clutch
18. Secure Battery Straps

Features

Mid and Rear Motor Mounting Options

Depending on your driving preference or track conditions, the 22 will deliver the configuration you need. For the first time, TLR is providing both rear- and mid-mount motor configurations in a single kit.

Complete Kit

Build the 22 from the ground up so you know and control the entire assembly process to your exact specifications.

2.5mm Hard-Anodized Aluminum Chassis

The precision-machined 7075-T6 2.5mm aluminum chassis is hard-anodized for increased durability and a great look.

12mm Big Bore Shocks

Smooth the ride, tame large jumps and tune suspension performance with these oversized shocks with bladder compensators.

Adjustable Front Kick (20-25°)

The 22's front end has best-in-class clearance that allows for improved handling. It gives you more clearance when you enter and exit steep jumps.
Plus it's tunable via a shim from 20 to 25 degrees.

Adjustable Caster (0, 3, 5, 10°)

The 22's caster can be adjusted in 0-, 3-, 5- and 10-degree* increments via the spindle carriers.
* 0-, 3-, and 5-degree spindles are optional.