HPI Savage REVERSE MIXER PRO HP 308

 Enhance your Savage X with reverse gear! Get out of tight spots and rescue yourself when stuck against any obstacle. Providing an electronic link between the receiver and Reverse Module servo, the Reverse Mixer Pro makes reverse easy to select and helps protect your Savage X transmission! Best of all, you only need a two-channel radio, you don't need to purchase a new radio set!

To use the mixer to select reverse, simply hold full brakes for 3 seconds. The reverse module servo activates and selects reverse, then you can use normal throttle commands to accelerate and stop. To re-engage forward gear, just hold full brakes for 3 seconds once again, and you're off! This is a much more intuitive way to control the car, rather than using a cumbersome 3rd channel. Both hands stay on the controller for complete command of your Savage X.

Using the Reverse Mixer Pro prevents damage to the transmission of your Savage X as well, because the truck must be at a full stop for reverse to engage. It's no longer possible to put your truck into reverse while running forward at full speed!

The Reverse Mixer Pro requires

Reverse Module and

SF-1 Servo (or any servo) for correct use.