- Radio Controlled vehicles
- New Products & Special Offers
- Electric Helicopters and spares
- Electric Planes & Spares
- Mini & Micro Radio controlled vehicles
- Rock Crawlers
- Tamiya Plastic Contruction kits
- Electric Stuff
- Fuel power stuff
- HPI Spares
- Traxxas Spares
- General Parts
- Nitro Fuel
- Grease, Oils, cleaner, glues, threadlock etc...
- Tools
- Radio Gear
- Edit Rc Products
- Bodies, Paint, Wings etc...
- Ansmann Racing Products
- FlyCamOne Products
- Tekno Rc Traxxas Upgrades
- Wheels & Tyres
- Castle Creations Special offers
- Leatherman multi-tools
- Losi Spares
- Radio Controlled boats
E-FLITE UMX Beast BNF - EFLU4080
Description
NOW IN STOCK
Overview
Designed by aerobatic world champion Quique Somenzini, the Ultra Micro eXtreme (UMX) Beast® is a thrilling small-scale recreation of one of the most awe inspiring airplanes on the airshow circuit today. And, like the full-scale Beast, it delivers high-powered aerobatic excitement that will put a grin on the face of any intermediate to experienced RC pilot.
At the heart of its phenomenal performance is a brushless motor, propeller and battery combination that delivers a spine-tingling thrust-to-weight ratio. This incredible power output, combined with its well-balanced controls and carbon reinforced wing, allow the UMX™ Beast to achieve a level of precision and performance that has more in common with its giant-scale Hangar 9® twin than any ultra micro you’ve flown before.
The UMX Beast BNF comes completely assembled with a BL180 brushless outrunner motor and Spektrum AR6400LBL Ultra Micro DSM2 Receiver/BL ESC installed. Built-in long-throw servos on the AR6400LBL drive the elevator and rudder while two independent Spektrum AS2000L long-throw ultra micro servos drive the ailerons. A 2S 7.4V 120mAh 20C Li-Po battery and DC Li-Po charger are also included.
Key Features
- Flies with the feeling of a larger scale aerobatic plane
- Completely built and flight ready – just bind to any DSM2 aircraft transmitter with dual rates and expo
- Equipped with a brushless 180 outrunner motor
- Small enough for experienced pilots to fly in the backyard
- Includes 2S Li-Po flight battery and DC Li-Po charger
Specs
| Wingspan: | 14.7 in (374mm) |
| Overall Length: | 15.7 in (400mm) |
| Wing Area: | 83.8 sq in (5.40 sq dm) |
| Flying Weight: | 2.36 oz (67g) |
| Motor Size: | 180BL Brushless Outrunner, 2300Kv (included) |
| Radio: | AR6400LBL 6CH Brushless ESC Receiver (included) |
| Trim Scheme Colors: | Black, Red, Gold |
| CG (center of gravity): | 18mm from Leading Edge of Bottom Wing |
| Prop Size: | 5 x 2.75 in (127mm x 70mm) |
| Recommended Battery: | 2S 7.4V 120mAh Li-Po (included) |
| Aileron: | Yes |
| Elevator: | Yes |
| Rudder: | Yes |
| Throttle: | Yes |
| Flaps: | No |
| Retracts: | No |
| Approx. Flying Duration: | 5 minutes |
| Scale: | Ultra Micro |
| Charger: | Celectra 2S 7.4V DC Li-Po Charger (included) |
| Steering: | Yes |
| Experience Level: | Intermediate |
| Recommended Environment: | Indoor/Outdoor |
| Is Assembly Required: | No |
Needed to Complete
A 4+ Channel DSM2 Transmitter (with Dual Rates and Exponential programming recommended)
